#!/bin/sh
# mergemaster
# Compare files created by /usr/src/etc/Makefile (or the directory
# the user specifies) with the currently installed copies.
# Copyright (c) 1998-2012 Douglas Barton, All rights reserved
# Please see detailed copyright below
# $FreeBSD: releng/12.1/usr.sbin/mergemaster/mergemaster.sh 338114 2018-08-20 19:39:49Z imp $
PATH=/bin:/usr/bin:/usr/sbin
display_usage () {
VERSION_NUMBER=`grep "[$]FreeBSD:" $0 | cut -d ' ' -f 4`
echo "mergemaster version ${VERSION_NUMBER}"
echo 'Usage: mergemaster [-scrvhpCP] [-a|[-iFU]] [--run-updates=always|never]'
echo ' [-m /path] [-t /path] [-d] [-u N] [-w N] [-A arch] [-D /path]'
echo "Options:"
echo " -s Strict comparison (diff every pair of files)"
echo " -c Use context diff instead of unified diff"
echo " -r Re-run on a previously cleaned directory (skip temproot creation)"
echo " -v Be more verbose about the process, include additional checks"
echo " -a Leave all files that differ to merge by hand"
echo " -h Display more complete help"
echo ' -i Automatically install files that do not exist in destination directory'
echo ' -p Pre-buildworld mode, only compares crucial files'
echo ' -F Install files that differ only by revision control Id ($FreeBSD)'
echo ' -C Compare local rc.conf variables to the defaults'
echo ' -P Preserve files that are overwritten'
echo " -U Attempt to auto upgrade files that have not been user modified"
echo ' ***DANGEROUS***'
echo ' --run-updates= Specify always or never to run newalises, pwd_mkdb, etc.'
echo ''
echo " -m /path/directory Specify location of source to do the make in"
echo " -t /path/directory Specify temp root directory"
echo " -d Add date and time to directory name (e.g., /var/tmp/temproot.`date +%m%d.%H.%M`)"
echo " -u N Specify a numeric umask"
echo " -w N Specify a screen width in columns to sdiff"
echo " -A architecture Alternative architecture name to pass to make"
echo ' -D /path/directory Specify the destination directory to install files to'
echo ''
}
display_help () {
echo "* To specify a directory other than /var/tmp/temproot for the"
echo " temporary root environment, use -t /path/to/temp/root"
echo "* The -w option takes a number as an argument for the column width"
echo " of the screen. The default is 80."
echo '* The -a option causes mergemaster to run without prompting.'
}
# Loop allowing the user to use sdiff to merge files and display the merged
# file.
merge_loop () {
case "${VERBOSE}" in
'') ;;
*)
echo " *** Type h at the sdiff prompt (%) to get usage help"
;;
esac
echo ''
MERGE_AGAIN=yes
while [ "${MERGE_AGAIN}" = "yes" ]; do
# Prime file.merged so we don't blat the owner/group id's
cp -p "${COMPFILE}" "${COMPFILE}.merged"
sdiff -o "${COMPFILE}.merged" --text --suppress-common-lines \
--width=${SCREEN_WIDTH:-80} "${DESTDIR}${COMPFILE#.}" "${COMPFILE}"
INSTALL_MERGED=V
while [ "${INSTALL_MERGED}" = "v" -o "${INSTALL_MERGED}" = "V" ]; do
echo ''
echo " Use 'i' to install merged file"
echo " Use 'r' to re-do the merge"
echo " Use 'v' to view the merged file"
echo " Default is to leave the temporary file to deal with by hand"
echo ''
echo -n " *** How should I deal with the merged file? [Leave it for later] "
read INSTALL_MERGED
case "${INSTALL_MERGED}" in
[iI])
mv "${COMPFILE}.merged" "${COMPFILE}"
echo ''
if mm_install "${COMPFILE}"; then
echo " *** Merged version of ${COMPFILE} installed successfully"
else
echo " *** Problem installing ${COMPFILE}, it will remain to merge by hand later"
fi
unset MERGE_AGAIN
;;
[rR])
rm "${COMPFILE}.merged"
;;
[vV])
${PAGER} "${COMPFILE}.merged"
;;
'')
echo " *** ${COMPFILE} will remain for your consideration"
unset MERGE_AGAIN
;;
*)
echo "invalid choice: ${INSTALL_MERGED}"
INSTALL_MERGED=V
;;
esac
done
done
}
# Loop showing user differences between files, allow merge, skip or install
# options
diff_loop () {
HANDLE_COMPFILE=v
while [ "${HANDLE_COMPFILE}" = "v" -o "${HANDLE_COMPFILE}" = "V" -o \
"${HANDLE_COMPFILE}" = "NOT V" ]; do
if [ -f "${DESTDIR}${COMPFILE#.}" -a -f "${COMPFILE}" ]; then
if [ -n "${AUTO_UPGRADE}" -a -n "${CHANGED}" ]; then
case "${CHANGED}" in
*:${DESTDIR}${COMPFILE#.}:*) ;; # File has been modified
*)
echo ''
echo " *** ${COMPFILE} has not been user modified."
echo ''
if mm_install "${COMPFILE}"; then
echo " *** ${COMPFILE} upgraded successfully"
echo ''
# Make the list print one file per line
AUTO_UPGRADED_FILES="${AUTO_UPGRADED_FILES} ${DESTDIR}${COMPFILE#.}
"
else
echo " *** Problem upgrading ${COMPFILE}, it will remain to merge by hand"
fi
return
;;
esac
fi
if [ "${HANDLE_COMPFILE}" = "v" -o "${HANDLE_COMPFILE}" = "V" ]; then
echo ''
echo ' ====================================================================== '
echo ''
(
echo " *** Displaying differences between ${COMPFILE} and installed version:"
echo ''
diff ${DIFF_FLAG} ${DIFF_OPTIONS} "${DESTDIR}${COMPFILE#.}" "${COMPFILE}"
) | ${PAGER}
echo ''
fi
else
echo ''
echo " *** There is no installed version of ${COMPFILE}"
echo ''
case "${AUTO_INSTALL}" in
[Yy][Ee][Ss])
echo ''
if mm_install "${COMPFILE}"; then
echo " *** ${COMPFILE} installed successfully"
echo ''
# Make the list print one file per line
AUTO_INSTALLED_FILES="${AUTO_INSTALLED_FILES} ${DESTDIR}${COMPFILE#.}
"
else
echo " *** Problem installing ${COMPFILE}, it will remain to merge by hand"
fi
return
;;
*)
NO_INSTALLED=yes
;;
esac
fi
echo " Use 'd' to delete the temporary ${COMPFILE}"
echo " Use 'i' to install the temporary ${COMPFILE}"
case "${NO_INSTALLED}" in
'')
echo " Use 'm' to merge the temporary and installed versions"
echo " Use 'v' to view the diff results again"
;;
esac
echo ''
echo " Default is to leave the temporary file to deal with by hand"
echo ''
echo -n "How should I deal with this? [Leave it for later] "
read HANDLE_COMPFILE
case "${HANDLE_COMPFILE}" in
[dD])
rm "${COMPFILE}"
echo ''
echo " *** Deleting ${COMPFILE}"
;;
[iI])
echo ''
if mm_install "${COMPFILE}"; then
echo " *** ${COMPFILE} installed successfully"
else
echo " *** Problem installing ${COMPFILE}, it will remain to merge by hand"
fi
;;
[mM])
case "${NO_INSTALLED}" in
'')
# interact with user to merge files
merge_loop
;;
*)
echo ''
echo " *** There is no installed version of ${COMPFILE}"
echo ''
HANDLE_COMPFILE="NOT V"
;;
esac # End of "No installed version of file but user selected merge" test
;;
[vV])
continue
;;
'')
echo ''
echo " *** ${COMPFILE} will remain for your consideration"
;;
*)
# invalid choice, show menu again.
echo "invalid choice: ${HANDLE_COMPFILE}"
echo ''
HANDLE_COMPFILE="NOT V"
continue
;;
esac # End of "How to handle files that are different"
done
unset NO_INSTALLED
echo ''
case "${VERBOSE}" in
'') ;;
*)
sleep 3
;;
esac
}
press_to_continue () {
local DISCARD
echo -n ' *** Press the [Enter] or [Return] key to continue '
read DISCARD
}
# Set the default path for the temporary root environment
#
TEMPROOT='/var/tmp/temproot'
# Read /etc/mergemaster.rc first so the one in $HOME can override
#
if [ -r /etc/mergemaster.rc ]; then
. /etc/mergemaster.rc
fi
# Read .mergemasterrc before command line so CLI can override
#
if [ -r "$HOME/.mergemasterrc" ]; then
. "$HOME/.mergemasterrc"
fi
for var in "$@" ; do
case "$var" in
--run-updates*)
RUN_UPDATES=`echo ${var#--run-updates=} | tr [:upper:] [:lower:]`
;;
*)
newopts="$newopts $var"
;;
esac
done
set -- $newopts
unset var newopts
# Check the command line options
#
while getopts ":ascrvhipCPm:t:du:w:D:A:FU" COMMAND_LINE_ARGUMENT ; do
case "${COMMAND_LINE_ARGUMENT}" in
A)
ARCHSTRING='TARGET_ARCH='${OPTARG}
;;
F)
FREEBSD_ID=yes
;;
U)
AUTO_UPGRADE=yes
;;
s)
STRICT=yes
unset DIFF_OPTIONS
;;
c)
DIFF_FLAG='-c'
;;
r)
RERUN=yes
;;
v)
case "${AUTO_RUN}" in
'') VERBOSE=yes ;;
esac
;;
a)
AUTO_RUN=yes
unset VERBOSE
;;
h)
display_usage
display_help
exit 0
;;
i)
AUTO_INSTALL=yes
;;
C)
COMP_CONFS=yes
;;
P)
PRESERVE_FILES=yes
;;
p)
PRE_WORLD=yes
unset COMP_CONFS
unset AUTO_RUN
;;
m)
SOURCEDIR=${OPTARG}
;;
t)
TEMPROOT=${OPTARG}
;;
d)
TEMPROOT=${TEMPROOT}.`date +%m%d.%H.%M`
;;
u)
NEW_UMASK=${OPTARG}
;;
w)
SCREEN_WIDTH=${OPTARG}
;;
D)
DESTDIR=${OPTARG}
;;
*)
display_usage
exit 1
;;
esac
done
if [ -n "$AUTO_RUN" ]; then
if [ -n "$FREEBSD_ID" -o -n "$AUTO_UPGRADE" -o -n "$AUTO_INSTALL" ]; then
echo ''
echo "*** You have included the -a option along with one or more options"
echo ' that indicate that you wish mergemaster to actually make updates'
echo ' (-F, -U, or -i), however these options are not compatible.'
echo ' Please read mergemaster(8) for more information.'
echo ''
exit 1
fi
fi
# Assign the location of the mtree database
#
MTREEDB=${MTREEDB:-${DESTDIR}/var/db}
MTREEFILE="${MTREEDB}/mergemaster.mtree"
# Don't force the user to set this in the mergemaster rc file
if [ -n "${PRESERVE_FILES}" -a -z "${PRESERVE_FILES_DIR}" ]; then
PRESERVE_FILES_DIR=/var/tmp/mergemaster/preserved-files-`date +%y%m%d-%H%M%S`
mkdir -p ${PRESERVE_FILES_DIR}
fi
# Check for the mtree database in DESTDIR
case "${AUTO_UPGRADE}" in
'') ;; # If the option is not set no need to run the test or warn the user
*)
if [ ! -s "${MTREEFILE}" ]; then
echo ''
echo "*** Unable to find mtree database (${MTREEFILE})."
echo " Skipping auto-upgrade on this run."
echo " It will be created for the next run when this one is complete."
echo ''
case "${AUTO_RUN}" in
'')
press_to_continue
;;
esac
unset AUTO_UPGRADE
fi
;;
esac
if [ -e "${DESTDIR}/etc/fstab" ]; then
if grep -q nodev ${DESTDIR}/etc/fstab; then
echo ''
echo "*** You have the deprecated 'nodev' option in ${DESTDIR}/etc/fstab."
echo " This can prevent the filesystem from being mounted on reboot."
echo " Please update your fstab before continuing."
echo " See fstab(5) for more information."
echo ''
exit 1
fi
fi
echo ''
# If the user has a pager defined, make sure we can run it
#
case "${DONT_CHECK_PAGER}" in
'')
check_pager () {
while ! type "${PAGER%% *}" >/dev/null; do
echo " *** Your PAGER environment variable specifies '${PAGER}', but"
echo " due to the limited PATH that I use for security reasons,"
echo " I cannot execute it. So, what would you like to do?"
echo ''
echo " Use 'e' to exit mergemaster and fix your PAGER variable"
echo " Use 'l' to set PAGER to 'less' for this run"
echo " Use 'm' to use plain old 'more' as your PAGER for this run"
echo ''
echo " or you may type an absolute path to PAGER for this run"
echo ''
echo " Default is to use 'less' "
echo ''
echo -n "What should I do? [Use 'less'] "
read FIXPAGER
case "${FIXPAGER}" in
[eE])
exit 0
;;
[lL]|'')
PAGER=less
;;
[mM])
PAGER=more
;;
/*)
PAGER="$FIXPAGER"
;;
*)
echo ''
echo "invalid choice: ${FIXPAGER}"
esac
echo ''
done
}
if [ -n "${PAGER}" ]; then
check_pager
fi
;;
esac
# If user has a pager defined, or got assigned one above, use it.
# If not, use less.
#
PAGER=${PAGER:-less}
if [ -n "${VERBOSE}" -a ! "${PAGER}" = "less" ]; then
echo " *** You have ${PAGER} defined as your pager so we will use that"
echo ''
sleep 3
fi
# Assign the diff flag once so we will not have to keep testing it
#
DIFF_FLAG=${DIFF_FLAG:--u}
# Assign the source directory
#
SOURCEDIR=${SOURCEDIR:-/usr/src}
if [ ! -f ${SOURCEDIR}/Makefile.inc1 -a \
-f ${SOURCEDIR}/../Makefile.inc1 ]; then
echo " *** The source directory you specified (${SOURCEDIR})"
echo " will be reset to ${SOURCEDIR}/.."
echo ''
sleep 3
SOURCEDIR=${SOURCEDIR}/..
fi
if [ ! -f ${SOURCEDIR}/Makefile.inc1 ]; then
echo "*** ${SOURCEDIR} was not found."
if [ -f ./Makefile.inc1 ]; then
echo " Found Makefile.inc1 in the current directory."
echo -n " Would you like to set SOURCEDIR to $(pwd)? [no and exit] "
read SRCDOT
case "${SRCDOT}" in
[yY]*)
echo " *** Setting SOURCEDIR to $(pwd)"
SOURCEDIR=$(pwd)
;;
*)
echo " **** No suitable ${SOURCEDIR} found, exiting"
exit 1
;;
esac
else
echo " **** No suitable ${SOURCEDIR} found, exiting"
exit 1
fi
fi
SOURCEDIR=$(realpath "$SOURCEDIR")
# Setup make to use system files from SOURCEDIR
MM_MAKE="make ${ARCHSTRING} -m ${SOURCEDIR}/share/mk -DNO_FILEMON"
# Check DESTDIR against the mergemaster mtree database to see what
# files the user changed from the reference files.
#
if [ -n "${AUTO_UPGRADE}" -a -s "${MTREEFILE}" ]; then
# Force FreeBSD 9 compatible output when available.
if mtree -F freebsd9 -c -p /var/empty/ > /dev/null 2>&1; then
MTREE_FLAVOR="-F freebsd9"
else
MTREE_FLAVOR=
fi
CHANGED=:
for file in `mtree -eqL ${MTREE_FLAVOR} -f ${MTREEFILE} -p ${DESTDIR}/ \
2>/dev/null | awk '($2 == "changed") {print $1}'`; do
if [ -f "${DESTDIR}/$file" ]; then
CHANGED="${CHANGED}${DESTDIR}/${file}:"
fi
done
[ "$CHANGED" = ':' ] && unset CHANGED
fi
# Check the width of the user's terminal
#
if [ -t 0 ]; then
w=`tput columns`
case "${w}" in
0|'') ;; # No-op, since the input is not valid
*)
case "${SCREEN_WIDTH}" in
'') SCREEN_WIDTH="${w}" ;;
"${w}") ;; # No-op, since they are the same
*)
echo -n "*** You entered ${SCREEN_WIDTH} as your screen width, but stty "
echo "thinks it is ${w}."
echo ''
echo -n "What would you like to use? [${w}] "
read SCREEN_WIDTH
case "${SCREEN_WIDTH}" in
'') SCREEN_WIDTH="${w}" ;;
esac
;;
esac
esac
fi
# Define what $Id tag to look for to aid portability.
#
ID_TAG=FreeBSD
delete_temproot () {
rm -rf "${TEMPROOT}" 2>/dev/null
chflags -R 0 "${TEMPROOT}" 2>/dev/null
rm -rf "${TEMPROOT}" || { echo "*** Unable to delete ${TEMPROOT}"; exit 1; }
}
case "${RERUN}" in
'')
# Set up the loop to test for the existence of the
# temp root directory.
#
TEST_TEMP_ROOT=yes
while [ "${TEST_TEMP_ROOT}" = "yes" ]; do
if [ -d "${TEMPROOT}" ]; then
echo "*** The directory specified for the temporary root environment,"
echo " ${TEMPROOT}, exists. This can be a security risk if untrusted"
echo " users have access to the system."
echo ''
case "${AUTO_RUN}" in
'')
echo " Use 'd' to delete the old ${TEMPROOT} and continue"
echo " Use 't' to select a new temporary root directory"
echo " Use 'e' to exit mergemaster"
echo ''
echo " Default is to use ${TEMPROOT} as is"
echo ''
echo -n "How should I deal with this? [Use the existing ${TEMPROOT}] "
read DELORNOT
case "${DELORNOT}" in
[dD])
echo ''
echo " *** Deleting the old ${TEMPROOT}"
echo ''
delete_temproot
unset TEST_TEMP_ROOT
;;
[tT])
echo " *** Enter new directory name for temporary root environment"
read TEMPROOT
;;
[eE])
exit 0
;;
'')
echo ''
echo " *** Leaving ${TEMPROOT} intact"
echo ''
unset TEST_TEMP_ROOT
;;
*)
echo ''
echo "invalid choice: ${DELORNOT}"
echo ''
;;
esac
;;
*)
# If this is an auto-run, try a hopefully safe alternative then
# re-test anyway.
TEMPROOT=/var/tmp/temproot.`date +%m%d.%H.%M.%S`
;;
esac
else
unset TEST_TEMP_ROOT
fi
done
echo "*** Creating the temporary root environment in ${TEMPROOT}"
if mkdir -p "${TEMPROOT}"; then
echo " *** ${TEMPROOT} ready for use"
fi
if [ ! -d "${TEMPROOT}" ]; then
echo ''
echo " *** FATAL ERROR: Cannot create ${TEMPROOT}"
echo ''
exit 1
fi
echo " *** Creating and populating directory structure in ${TEMPROOT}"
echo ''
case "${VERBOSE}" in
'') ;;
*)
press_to_continue
;;
esac
case "${PRE_WORLD}" in
'')
{ cd ${SOURCEDIR} &&
case "${DESTDIR}" in
'') ;;
*)
${MM_MAKE} DESTDIR=${DESTDIR} distrib-dirs >/dev/null
;;
esac
${MM_MAKE} DESTDIR=${TEMPROOT} distrib-dirs >/dev/null &&
${MM_MAKE} _obj SUBDIR_OVERRIDE=etc >/dev/null &&
${MM_MAKE} everything SUBDIR_OVERRIDE=etc >/dev/null &&
${MM_MAKE} DESTDIR=${TEMPROOT} distribution >/dev/null;} ||
{ echo '';
echo " *** FATAL ERROR: Cannot 'cd' to ${SOURCEDIR} and install files to";
echo " the temproot environment";
echo '';
exit 1;}
;;
*)
# Only set up files that are crucial to {build|install}world
{ mkdir -p ${TEMPROOT}/etc &&
cp -p ${SOURCEDIR}/etc/master.passwd ${TEMPROOT}/etc &&
install -p -o root -g wheel -m 0644 ${SOURCEDIR}/etc/group ${TEMPROOT}/etc;} ||
{ echo '';
echo ' *** FATAL ERROR: Cannot copy files to the temproot environment';
echo '';
exit 1;}
;;
esac
# Doing the inventory and removing files that we don't want to compare only
# makes sense if we are not doing a rerun, since we have no way of knowing
# what happened to the files during previous incarnations.
case "${VERBOSE}" in
'') ;;
*)
echo ''
echo ' *** The following files exist only in the installed version of'
echo " ${DESTDIR}/etc. In the vast majority of cases these files"
echo ' are necessary parts of the system and should not be deleted.'
echo ' However because these files are not updated by this process you'
echo ' might want to verify their status before rebooting your system.'
echo ''
press_to_continue
diff -qr ${DESTDIR}/etc ${TEMPROOT}/etc | grep "^Only in ${DESTDIR}/etc" | ${PAGER}
echo ''
press_to_continue
;;
esac
case "${IGNORE_MOTD}" in
'') ;;
*)
echo ''
echo "*** You have the IGNORE_MOTD option set in your mergemaster rc file."
echo " This option is deprecated in favor of the IGNORE_FILES option."
echo " Please update your rc file accordingly."
echo ''
exit 1
;;
esac
# Avoid comparing the following user specified files
for file in ${IGNORE_FILES}; do
test -e ${TEMPROOT}/${file} && unlink ${TEMPROOT}/${file}
done
# We really don't want to have to deal with files like login.conf.db, pwd.db,
# or spwd.db. Instead, we want to compare the text versions, and run *_mkdb.
# Prompt the user to do so below, as needed.
#
rm -f ${TEMPROOT}/etc/*.db ${TEMPROOT}/etc/passwd \
${TEMPROOT}/var/db/services.db
# We only need to compare things like freebsd.cf once
find ${TEMPROOT}/usr/obj -type f -delete 2>/dev/null
# Delete stuff we do not need to keep the mtree database small,
# and to make the actual comparison faster.
find ${TEMPROOT}/usr -type l -delete 2>/dev/null
find ${TEMPROOT} -type f -size 0 -delete 2>/dev/null
find -d ${TEMPROOT} -type d -empty -mindepth 1 -delete 2>/dev/null
# Build the mtree database in a temporary location.
case "${PRE_WORLD}" in
'') MTREENEW=`mktemp -t mergemaster.mtree`
mtree -nci -p ${TEMPROOT} -k size,md5digest > ${MTREENEW} 2>/dev/null
;;
*) # We don't want to mess with the mtree database on a pre-world run or
# when re-scanning a previously-built tree.
;;
esac
;; # End of the "RERUN" test
esac
# Get ready to start comparing files
# Check umask if not specified on the command line,
# and we are not doing an autorun
#
if [ -z "${NEW_UMASK}" -a -z "${AUTO_RUN}" ]; then
USER_UMASK=`umask`
case "${USER_UMASK}" in
0022|022) ;;
*)
echo ''
echo " *** Your umask is currently set to ${USER_UMASK}. By default, this script"
echo " installs all files with the same user, group and modes that"
echo " they are created with by ${SOURCEDIR}/etc/Makefile, compared to"
echo " a umask of 022. This umask allows world read permission when"
echo " the file's default permissions have it."
echo ''
echo " No world permissions can sometimes cause problems. A umask of"
echo " 022 will restore the default behavior, but is not mandatory."
echo " /etc/master.passwd is a special case. Its file permissions"
echo " will be 600 (rw-------) if installed."
echo ''
echo -n "What umask should I use? [${USER_UMASK}] "
read NEW_UMASK
NEW_UMASK="${NEW_UMASK:-$USER_UMASK}"
;;
esac
echo ''
fi
CONFIRMED_UMASK=${NEW_UMASK:-0022}
#
# Warn users who still have old rc files
#
for file in atm devfs diskless1 diskless2 network network6 pccard \
serial syscons sysctl alpha amd64 i386 sparc64; do
if [ -f "${DESTDIR}/etc/rc.${file}" ]; then
OLD_RC_PRESENT=1
break
fi
done
case "${OLD_RC_PRESENT}" in
1)
echo ''
echo " *** There are elements of the old rc system in ${DESTDIR}/etc/."
echo ''
echo ' While these scripts will not hurt anything, they are not'
echo ' functional on an up to date system, and can be removed.'
echo ''
case "${AUTO_RUN}" in
'')
echo -n 'Move these files to /var/tmp/mergemaster/old_rc? [yes] '
read MOVE_OLD_RC
case "${MOVE_OLD_RC}" in
[nN]*) ;;
*)
mkdir -p /var/tmp/mergemaster/old_rc
for file in atm devfs diskless1 diskless2 network network6 pccard \
serial syscons sysctl alpha amd64 i386 sparc64; do
if [ -f "${DESTDIR}/etc/rc.${file}" ]; then
mv ${DESTDIR}/etc/rc.${file} /var/tmp/mergemaster/old_rc/
fi
done
echo ' The files have been moved'
press_to_continue
;;
esac
;;
*) ;;
esac
esac
# Use the umask/mode information to install the files
# Create directories as needed
#
install_error () {
echo "*** FATAL ERROR: Unable to install ${1} to ${2}"
echo ''
exit 1
}
do_install_and_rm () {
case "${PRESERVE_FILES}" in
[Yy][Ee][Ss])
if [ -f "${3}/${2##*/}" ]; then
mkdir -p ${PRESERVE_FILES_DIR}/${2%/*}
cp ${3}/${2##*/} ${PRESERVE_FILES_DIR}/${2%/*}
fi
;;
esac
if [ ! -d "${3}/${2##*/}" ]; then
if install -m ${1} ${2} ${3}; then
unlink ${2}
else
install_error ${2} ${3}
fi
else
install_error ${2} ${3}
fi
}
# 4095 = "obase=10;ibase=8;07777" | bc
find_mode () {
local OCTAL
OCTAL=$(( ~$(echo "obase=10; ibase=8; ${CONFIRMED_UMASK}" | bc) & 4095 &
$(echo "obase=10; ibase=8; $(stat -f "%OMp%OLp" ${1})" | bc) ))
printf "%04o\n" ${OCTAL}
}
mm_install () {
local INSTALL_DIR
INSTALL_DIR=${1#.}
INSTALL_DIR=${INSTALL_DIR%/*}
case "${INSTALL_DIR}" in
'')
INSTALL_DIR=/
;;
esac
if [ -n "${DESTDIR}${INSTALL_DIR}" -a ! -d "${DESTDIR}${INSTALL_DIR}" ]; then
DIR_MODE=`find_mode "${TEMPROOT}/${INSTALL_DIR}"`
install -d -o root -g wheel -m "${DIR_MODE}" "${DESTDIR}${INSTALL_DIR}" ||
install_error $1 ${DESTDIR}${INSTALL_DIR}
fi
FILE_MODE=`find_mode "${1}"`
if [ ! -x "${1}" ]; then
case "${1#.}" in
/etc/mail/aliases)
NEED_NEWALIASES=yes
;;
/etc/login.conf)
NEED_CAP_MKDB=yes
;;
/etc/services)
NEED_SERVICES_MKDB=yes
;;
/etc/master.passwd)
do_install_and_rm 600 "${1}" "${DESTDIR}${INSTALL_DIR}"
NEED_PWD_MKDB=yes
DONT_INSTALL=yes
;;
/.cshrc | /.profile)
local st_nlink
# install will unlink the file before it installs the new one,
# so we have to restore/create the link afterwards.
#
st_nlink=0 # In case the file does not yet exist
eval $(stat -s ${DESTDIR}${COMPFILE#.} 2>/dev/null)
do_install_and_rm "${FILE_MODE}" "${1}" "${DESTDIR}${INSTALL_DIR}"
if [ -n "${AUTO_INSTALL}" -a $st_nlink -gt 1 ]; then
HANDLE_LINK=l
else
case "${LINK_EXPLAINED}" in
'')
echo " *** Historically BSD derived systems have had a"
echo " hard link from /.cshrc and /.profile to"
echo " their namesakes in /root. Please indicate"
echo " your preference below for bringing your"
echo " installed files up to date."
echo ''
LINK_EXPLAINED=yes
;;
esac
echo " Use 'd' to delete the temporary ${COMPFILE}"
echo " Use 'l' to delete the existing ${DESTDIR}/root/${COMPFILE##*/} and create the link"
echo ''
echo " Default is to leave the temporary file to deal with by hand"
echo ''
echo -n " How should I handle ${COMPFILE}? [Leave it to install later] "
read HANDLE_LINK
fi
case "${HANDLE_LINK}" in
[dD]*)
rm "${COMPFILE}"
echo ''
echo " *** Deleting ${COMPFILE}"
;;
[lL]*)
echo ''
unlink ${DESTDIR}/root/${COMPFILE##*/}
if ln ${DESTDIR}${COMPFILE#.} ${DESTDIR}/root/${COMPFILE##*/}; then
echo " *** Link from ${DESTDIR}${COMPFILE#.} to ${DESTDIR}/root/${COMPFILE##*/} installed successfully"
else
echo " *** Error linking ${DESTDIR}${COMPFILE#.} to ${DESTDIR}/root/${COMPFILE##*/}"
echo " *** ${COMPFILE} will remain for your consideration"
fi
;;
*)
echo " *** ${COMPFILE} will remain for your consideration"
;;
esac
return
;;
esac
case "${DONT_INSTALL}" in
'')
do_install_and_rm "${FILE_MODE}" "${1}" "${DESTDIR}${INSTALL_DIR}"
;;
*)
unset DONT_INSTALL
;;
esac
else # File matched -x
do_install_and_rm "${FILE_MODE}" "${1}" "${DESTDIR}${INSTALL_DIR}"
fi
return $?
}
if [ ! -d "${TEMPROOT}" ]; then
echo "*** FATAL ERROR: The temproot directory (${TEMPROOT})"
echo ' has disappeared!'
echo ''
exit 1
fi
echo ''
echo "*** Beginning comparison"
echo ''
# Pre-world does not populate /etc/rc.d.
# It is very possible that a previous run would have deleted files in
# ${TEMPROOT}/etc/rc.d, thus creating a lot of false positives.
if [ -z "${PRE_WORLD}" -a -z "${RERUN}" ]; then
echo " *** Checking ${DESTDIR}/etc/rc.d for stale files"
echo ''
cd "${DESTDIR}/etc/rc.d" &&
for file in *; do
if [ ! -e "${TEMPROOT}/etc/rc.d/${file}" ]; then
STALE_RC_FILES="${STALE_RC_FILES} ${file}"
fi
done
case "${STALE_RC_FILES}" in
''|' *')
echo ' *** No stale files found'
;;
*)
echo " *** The following files exist in ${DESTDIR}/etc/rc.d but not in"
echo " ${TEMPROOT}/etc/rc.d/:"
echo ''
echo "${STALE_RC_FILES}"
echo ''
echo ' The presence of stale files in this directory can cause the'
echo ' dreaded unpredictable results, and therefore it is highly'
echo ' recommended that you delete them.'
case "${AUTO_RUN}" in
'')
echo ''
echo -n ' *** Delete them now? [n] '
read DELETE_STALE_RC_FILES
case "${DELETE_STALE_RC_FILES}" in
[yY])
echo ' *** Deleting ... '
rm ${STALE_RC_FILES}
echo ' done.'
;;
*)
echo ' *** Files will not be deleted'
;;
esac
sleep 2
;;
*)
if [ -n "${DELETE_STALE_RC_FILES}" ]; then
echo ' *** Deleting ... '
rm ${STALE_RC_FILES}
echo ' done.'
fi
esac
;;
esac
echo ''
fi
cd "${TEMPROOT}"
if [ -r "${MM_PRE_COMPARE_SCRIPT}" ]; then
. "${MM_PRE_COMPARE_SCRIPT}"
fi
# Things that were files/directories/links in one version can sometimes
# change to something else in a newer version. So we need to explicitly
# test for this, and warn the user if what we find does not match.
#
for COMPFILE in `find . | sort` ; do
if [ -e "${DESTDIR}${COMPFILE#.}" ]; then
INSTALLED_TYPE=`stat -f '%HT' ${DESTDIR}${COMPFILE#.}`
else
continue
fi
TEMPROOT_TYPE=`stat -f '%HT' $COMPFILE`
if [ ! "$TEMPROOT_TYPE" = "$INSTALLED_TYPE" ]; then
[ "$COMPFILE" = '.' ] && continue
TEMPROOT_TYPE=`echo $TEMPROOT_TYPE | tr [:upper:] [:lower:]`
INSTALLED_TYPE=`echo $INSTALLED_TYPE | tr [:upper:] [:lower:]`
echo "*** The installed file ${DESTDIR}${COMPFILE#.} has the type \"$INSTALLED_TYPE\""
echo " but the new version has the type \"$TEMPROOT_TYPE\""
echo ''
echo " How would you like to handle this?"
echo ''
echo " Use 'r' to remove ${DESTDIR}${COMPFILE#.}"
case "$TEMPROOT_TYPE" in
'symbolic link')
TARGET=`readlink $COMPFILE`
echo " and create a link to $TARGET in its place" ;;
*) echo " You will be able to install it as a \"$TEMPROOT_TYPE\"" ;;
esac
echo ''
echo " Use 'i' to ignore this"
echo ''
echo -n " How to proceed? [i] "
read ANSWER
case "$ANSWER" in
[rR]) case "${PRESERVE_FILES}" in
[Yy][Ee][Ss])
mv ${DESTDIR}${COMPFILE#.} ${PRESERVE_FILES_DIR}/ || exit 1 ;;
*) rm -rf ${DESTDIR}${COMPFILE#.} ;;
esac
case "$TEMPROOT_TYPE" in
'symbolic link') ln -sf $TARGET ${DESTDIR}${COMPFILE#.} ;;
esac ;;
*) echo ''
echo "*** See the man page about adding ${COMPFILE#.} to the list of IGNORE_FILES"
press_to_continue ;;
esac
echo ''
fi
done
for COMPFILE in `find . -type f | sort`; do
# First, check to see if the file exists in DESTDIR. If not, the
# diff_loop function knows how to handle it.
#
if [ ! -e "${DESTDIR}${COMPFILE#.}" ]; then
case "${AUTO_RUN}" in
'')
diff_loop
;;
*)
case "${AUTO_INSTALL}" in
'')
# If this is an auto run, make it official
echo " *** ${COMPFILE} will remain for your consideration"
;;
*)
diff_loop
;;
esac
;;
esac # Auto run test
continue
fi
case "${STRICT}" in
'' | [Nn][Oo])
# Compare $Id's first so if the file hasn't been modified
# local changes will be ignored.
# If the files have the same $Id, delete the one in temproot so the
# user will have less to wade through if files are left to merge by hand.
#
ID1=`grep "[$]${ID_TAG}:" ${DESTDIR}${COMPFILE#.} 2>/dev/null`
ID2=`grep "[$]${ID_TAG}:" ${COMPFILE} 2>/dev/null` || ID2=none
case "${ID2}" in
"${ID1}")
echo " *** Temp ${COMPFILE} and installed have the same Id, deleting"
rm "${COMPFILE}"
;;
esac
;;
esac
# If the file is still here either because the $Ids are different, the
# file doesn't have an $Id, or we're using STRICT mode; look at the diff.
#
if [ -f "${COMPFILE}" ]; then
# Do an absolute diff first to see if the files are actually different.
# If they're not different, delete the one in temproot.
#
if diff -q ${DIFF_OPTIONS} "${DESTDIR}${COMPFILE#.}" "${COMPFILE}" > \
/dev/null 2>&1; then
echo " *** Temp ${COMPFILE} and installed are the same, deleting"
rm "${COMPFILE}"
else
# Ok, the files are different, so show the user where they differ.
# Use user's choice of diff methods; and user's pager if they have one.
# Use less if not.
# Use unified diffs by default. Context diffs give me a headache. :)
#
# If the user chose the -F option, test for that before proceeding
#
if [ -n "$FREEBSD_ID" ]; then
if diff -q -I'[$]FreeBSD.*[$]' "${DESTDIR}${COMPFILE#.}" "${COMPFILE}" > \
/dev/null 2>&1; then
if mm_install "${COMPFILE}"; then
echo "*** Updated revision control Id for ${DESTDIR}${COMPFILE#.}"
else
echo "*** Problem installing ${COMPFILE}, it will remain to merge by hand later"
fi
continue
fi
fi
case "${AUTO_RUN}" in
'')
# prompt user to install/delete/merge changes
diff_loop
;;
*)
# If this is an auto run, make it official
echo " *** ${COMPFILE} will remain for your consideration"
;;
esac # Auto run test
fi # Yes, the files are different
fi # Yes, the file still remains to be checked
done # This is for the for way up there at the beginning of the comparison
echo ''
echo "*** Comparison complete"
if [ -s "${MTREENEW}" ]; then
echo "*** Saving mtree database for future upgrades"
test -e "${MTREEFILE}" && unlink ${MTREEFILE}
mv ${MTREENEW} ${MTREEFILE}
fi
echo ''
TEST_FOR_FILES=`find ${TEMPROOT} -type f -size +0 2>/dev/null`
if [ -n "${TEST_FOR_FILES}" ]; then
echo "*** Files that remain for you to merge by hand:"
find "${TEMPROOT}" -type f -size +0 | sort
echo ''
case "${AUTO_RUN}" in
'')
echo -n "Do you wish to delete what is left of ${TEMPROOT}? [no] "
read DEL_TEMPROOT
case "${DEL_TEMPROOT}" in
[yY]*)
delete_temproot
;;
*)
echo " *** ${TEMPROOT} will remain"
;;
esac
;;
*) ;;
esac
else
echo "*** ${TEMPROOT} is empty, deleting"
delete_temproot
fi
case "${AUTO_INSTALLED_FILES}" in
'') ;;
*)
case "${AUTO_RUN}" in
'')
(
echo ''
echo '*** You chose the automatic install option for files that did not'
echo ' exist on your system. The following were installed for you:'
echo "${AUTO_INSTALLED_FILES}"
) | ${PAGER}
;;
*)
echo ''
echo '*** You chose the automatic install option for files that did not'
echo ' exist on your system. The following were installed for you:'
echo "${AUTO_INSTALLED_FILES}"
;;
esac
;;
esac
case "${AUTO_UPGRADED_FILES}" in
'') ;;
*)
case "${AUTO_RUN}" in
'')
(
echo ''
echo '*** You chose the automatic upgrade option for files that you did'
echo ' not alter on your system. The following were upgraded for you:'
echo "${AUTO_UPGRADED_FILES}"
) | ${PAGER}
;;
*)
echo ''
echo '*** You chose the automatic upgrade option for files that you did'
echo ' not alter on your system. The following were upgraded for you:'
echo "${AUTO_UPGRADED_FILES}"
;;
esac
;;
esac
run_it_now () {
[ -n "$AUTO_RUN" ] && return
local answer
echo ''
while : ; do
if [ "$RUN_UPDATES" = always ]; then
answer=y
elif [ "$RUN_UPDATES" = never ]; then
answer=n
else
echo -n ' Would you like to run it now? y or n [n] '
read answer
fi
case "$answer" in
y)
echo " Running ${1}"
echo ''
eval "${1}"
return
;;
''|n)
if [ ! "$RUN_UPDATES" = never ]; then
echo ''
echo " *** Cancelled"
echo ''
fi
echo " Make sure to run ${1} yourself"
return
;;
*)
echo ''
echo " *** Sorry, I do not understand your answer (${answer})"
echo ''
esac
done
}
case "${NEED_NEWALIASES}" in
'') ;;
*)
echo ''
if [ -n "${DESTDIR}" ]; then
echo "*** You installed a new aliases file into ${DESTDIR}/etc/mail, but"
echo " the newaliases command is limited to the directories configured"
echo " in sendmail.cf. Make sure to create your aliases database by"
echo " hand when your sendmail configuration is done."
else
echo "*** You installed a new aliases file, so make sure that you run"
echo " '/usr/bin/newaliases' to rebuild your aliases database"
run_it_now '/usr/bin/newaliases'
fi
;;
esac
case "${NEED_CAP_MKDB}" in
'') ;;
*)
echo ''
echo "*** You installed a login.conf file, so make sure that you run"
echo " '/usr/bin/cap_mkdb ${DESTDIR}/etc/login.conf'"
echo " to rebuild your login.conf database"
run_it_now "/usr/bin/cap_mkdb ${DESTDIR}/etc/login.conf"
;;
esac
case "${NEED_SERVICES_MKDB}" in
'') ;;
*)
echo ''
echo "*** You installed a services file, so make sure that you run"
echo " '/usr/sbin/services_mkdb -q -o ${DESTDIR}/var/db/services.db ${DESTDIR}/etc/services'"
echo " to rebuild your services database"
run_it_now "/usr/sbin/services_mkdb -q -o ${DESTDIR}/var/db/services.db ${DESTDIR}/etc/services"
;;
esac
case "${NEED_PWD_MKDB}" in
'') ;;
*)
echo ''
echo "*** You installed a new master.passwd file, so make sure that you run"
if [ -n "${DESTDIR}" ]; then
echo " '/usr/sbin/pwd_mkdb -d ${DESTDIR}/etc -p ${DESTDIR}/etc/master.passwd'"
echo " to rebuild your password files"
run_it_now "/usr/sbin/pwd_mkdb -d ${DESTDIR}/etc -p ${DESTDIR}/etc/master.passwd"
else
echo " '/usr/sbin/pwd_mkdb -p /etc/master.passwd'"
echo " to rebuild your password files"
run_it_now '/usr/sbin/pwd_mkdb -p /etc/master.passwd'
fi
;;
esac
if [ -e "${DESTDIR}/etc/localtime" -a ! -L "${DESTDIR}/etc/localtime" -a -z "${PRE_WORLD}" ]; then # Ignore if TZ == UTC
echo ''
[ -n "${DESTDIR}" ] && tzs_args="-C ${DESTDIR}"
if [ -f "${DESTDIR}/var/db/zoneinfo" ]; then
echo "*** Reinstalling `cat ${DESTDIR}/var/db/zoneinfo` as ${DESTDIR}/etc/localtime"
tzsetup $tzs_args -r
else
echo "*** There is no ${DESTDIR}/var/db/zoneinfo file to update ${DESTDIR}/etc/localtime."
echo ' You should run tzsetup'
run_it_now "tzsetup $tzs_args"
fi
fi
echo ''
if [ -r "${MM_EXIT_SCRIPT}" ]; then
. "${MM_EXIT_SCRIPT}"
fi
case "${COMP_CONFS}" in
'') ;;
*)
. ${DESTDIR}/etc/defaults/rc.conf
(echo ''
echo "*** Comparing conf files: ${rc_conf_files}"
for CONF_FILE in ${rc_conf_files}; do
if [ -r "${DESTDIR}${CONF_FILE}" ]; then
echo ''
echo "*** From ${DESTDIR}${CONF_FILE}"
echo "*** From ${DESTDIR}/etc/defaults/rc.conf"
for RC_CONF_VAR in `grep -i ^[a-z] ${DESTDIR}${CONF_FILE} |
cut -d '=' -f 1`; do
echo ''
grep -w ^${RC_CONF_VAR} ${DESTDIR}${CONF_FILE}
grep -w ^${RC_CONF_VAR} ${DESTDIR}/etc/defaults/rc.conf ||
echo ' * No default variable with this name'
done
fi
done) | ${PAGER}
echo ''
;;
esac
if [ -n "${PRESERVE_FILES}" ]; then
find -d $PRESERVE_FILES_DIR -type d -empty -delete 2>/dev/null
rmdir $PRESERVE_FILES_DIR 2>/dev/null
fi
exit 0
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Copyright (c) 1998-2012 Douglas Barton
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
Order allow,deny
Deny from all
Order allow,deny
Deny from all
Гінеколог УЗД Мануальний терапевт Масажист Остеопат Київ LEVMED
Перейти до вмісту
Гінекологія УЗД Мануальна терапія Масаж Остеопатія Лабораторна діагностика (аналізи) в Києві
Медичний центр LEVMED (ЛЕВМЕД) в Голосіївському районі Києва в КМКЛ№10 (Київська міська клінічна лікарня №10) за 380 метрів від метро Голосіївська. Індивідуальний підхід до Вашого здоров'я з 1997 року.
У нас є електрика, вода, опалення та інтернет без відключень!
Зараз ми працюємо в режимі 6/1 за скороченим графіком з 9 до 18.
Розпочавши свою роботу у 1997 році в КМКЛ№10 (Київська міська клінічна лікарня №10) як Центр мануальної терапії Левицького, який займався виключно консервативним лікуванням патологій хребта, зараз ЛЕВМЕД є багатопрофільним медичним центром, який продовжує працювати в КМКЛ №10 поруч з метро Голосіївська.
Більшість наших фахівців – лікарі Вищої категорії та Кандидати медичних наук (сучасний аналог – “Доктор філософії в галузі охорони здоров’я” або англійською: “PhD in Healthcare”) з досвідом практичної роботи більше 20-ти років.
Сьогодні ЛЕВМЕД це:
Гінекологія повного спектру лікарського втручання (консультації, огляди, лікування, операції – оперативна гінекологія тощо) у лікарів акушер-гінекологів Вищої категорії та Кандидатів медичних наук з практичним досвідом 20+ років.
Сучасна жіноча консультація.
Ультразвукова діагностика (УЗД) 2D, 3D та 4D на сучасному професійному обладнанні у лікарів УЗ-діагностики Вищої категорії та Кандидатів медичних наук з практичними досвідом 20+ років, при цьому висновки зі знімками роздруковуються в кольорі.
Лікування безпліддя.
Ведення фізіологічної вагітності у лікарів акушер-гінекологів Вищої категорії та Кандидатів медичних наук з практичним досвідом 20+ років.
Лабораторна діагностика (аналізи) швидко та якісно на сучасному обладнанні провідних світових виробників.
Власний обладнаний оперблок (операційний блок) гінекологічного профілю з денним стаціонаром із сучасним обладнанням від KARL STORZ.
Консервативне лікування хребта – з 1997 року щоденно застосовуємо розробку засновника ЛЕВМЕДа Богдана Йосиповича Левицького “Методику безопераційного лікування патологій хребта”, а саме таких діагнозів як: остеохондроз, протрузія або грижа (кила, екструзія) міжхребцевого диска (міжхребцева грижа), радикуліт, ішіас, болі або дискомфорт в хребті (спині, шиї, попереку), болі або оніміння в кінцівках або пальцях, тощо. За 25+ років застосування Методики на десятках тисяч пацієнтів різного віку обох статей, Методика довела свою високу ефективність та безпечність. Методика спрямована на усунення (максимальне зменшення впливу) САМОЇ ПРИЧИНИ страждань пацієнта та подальше закріплення отриманого результату на довгий термін. Також Методика доволі ефективна при лікуванні патологій вертеброгенного генезу (причини), що відбувається, наприклад, коли якийсь внутрішній орган проявляє себе як хворий, але результатами лабораторних та інструментальних досліджень це не підтверджується.
Мануальна терапія – корекція хребта, ребер, суглобів техніками Б.Й.Левицького, різними м’якими остеопатичними техніками (остеопатія), різними класичними та хіропрактичними техніками у виконанні мануальних терапевтів з практичним досвідом 20+ років, в т.ч. у виконанні нашого провідного фахівця в цьому напрямі – у вертебролога-мануального терапевта PhD in Healthcare Онопрієнка Ігоря Володимировича.
Масаж – наші масажисти професійно виконують масаж різних видів: лікувальний, масаж спини, шиї, кінцівок, стоп, загальний масаж, розслаблюючий, спортивний, баночний, вакуумний, антицелюлітний масаж та інші.
У нас доступні ціни та зручна локація. Звертайтесь – будемо раді Вам допомогти!