????
Current Path : /var/run/ |
Current File : //var/run/dmesg.boot |
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE r354233 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) E-2236 CPU @ 3.40GHz (3408.27-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 68719476736 (65536 MB) avail memory = 66746421248 (63654 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: < > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 11 10 4 5 2 3 6 7 8 9 Timecounter "TSC-low" frequency 1704135481 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <SUPERM SUPERM> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 350 Event timer "HPET1" frequency 24000000 Hz quality 340 Event timer "HPET2" frequency 24000000 Hz quality 340 Event timer "HPET3" frequency 24000000 Hz quality 340 Event timer "HPET4" frequency 24000000 Hz quality 340 Event timer "HPET5" frequency 24000000 Hz quality 340 Event timer "HPET6" frequency 24000000 Hz quality 340 Event timer "HPET7" frequency 24000000 Hz quality 340 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x6000-0x601f mem 0x91500000-0x9157ffff,0x91580000-0x91583fff irq 16 at device 0.0 on pci1 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 6 RX queues 6 TX queues ix0: Using MSI-X interrupts with 7 vectors ix0: allocated for 6 queues ix0: allocated for 6 rx queues ix0: Ethernet address: ac:1f:6b:ac:08:b9 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 6/2048, RX 6/2048 xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x91400000-0x9140ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <serial bus> at device 21.0 (no driver attached) pci0: <serial bus> at device 21.1 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) pci0: <simple comms> at device 22.4 (no driver attached) ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x7050-0x7057,0x7040-0x7043,0x7020-0x703f mem 0x91410000-0x91411fff,0x91417000-0x914170ff,0x91416000-0x914167ff irq 16 at device 23.0 on pci0 ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 device_attach: ahciem0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.4 on pci0 pci3: <ACPI PCI bus> on pcib3 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5000-0x501f mem 0x91200000-0x9127ffff,0x91280000-0x91283fff irq 16 at device 0.0 on pci3 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: ac:1f:6b:de:22:38 igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 27.5 on pci0 pci4: <ACPI PCI bus> on pcib4 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0x91100000-0x9117ffff,0x91180000-0x91183fff irq 17 at device 0.0 on pci4 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 4 RX queues 4 TX queues igb1: Using MSI-X interrupts with 5 vectors igb1: Ethernet address: ac:1f:6b:de:22:39 igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci6 pci7: <ACPI PCI bus> on pcib7 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0x90000000-0x90ffffff,0x91000000-0x9101ffff irq 17 at device 0.0 on pci7 vgapci0: Boot video device pci0: <simple comms> at device 30.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 acpi_syscontainer0: <System Container> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc9000-0xc9fff pnpid ORM0000 on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <INTEL SSDSC2KG240G8 XCV10110> ACS-3 ATA SATA 3.x device ada0: Serial Number PHYG946400BL240AGN ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <INTEL SSDSC2KG240G8 XCV10110> ACS-3 ATA SATA 3.x device ada1: Serial Number PHYG94650205240AGN ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 228936MB (468862128 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <TOSHIBA MG04ACA100N FJ4A> ATA8-ACS SATA 3.x device ada2: Serial Number 58S2K0L8F6XF ada2: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <TOSHIBA MG04ACA100N FJ4A> ATA8-ACS SATA 3.x device ada3: Serial Number 78JBK0TNF6XF ada3: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada3: Command Queueing enabled ada3: 953869MB (1953525168 512 byte sectors) ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <ST1000NM0008-2F2100 SN02> ACS-3 ATA SATA 3.x device ada4: Serial Number ZFA13HFW ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 953869MB (1953525168 512 byte sectors) ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 ada5: <ST1000NM0008-2F2100 SN02> ACS-3 ATA SATA 3.x device ada5: Serial Number ZFA13DYT ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 953869MB (1953525168 512 byte sectors) ada6 at ahcich6 bus 0 scbus6 target 0 lun 0 ada6: <INTEL SSDSC2KG960GZ 7CV10100> ACS-3 ATA SATA 3.x device ada6: Serial Number BTYJ23220CNA960BGN ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada6: Command Queueing enabled ada6: 915715MB (1875385008 512 byte sectors) ada7 at ahcich7 bus 0 scbus7 target 0 lun 0 ada7: <INTEL SSDSC2KG960GZ 7CV10100> ACS-3 ATA SATA 3.x device ada7: Serial Number BTYJ23220CPC960BGN ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada7: Command Queueing enabled ada7: 915715MB (1875385008 512 byte sectors) Trying to mount root from zfs:zroot0/ROOT/default []... Root mount waiting for: usbus0 uhub0: 26 ports with 26 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x0557 product 0x7000> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0 uhub1: 4 ports with 3 removable, self powered ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 kbd2 at ukbd0 lo0: link state changed to UP ix0: link state changed to UP vlan71: link state changed to UP vlan810: link state changed to UP ums0 on uhub1 ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled igb0: link state changed to UP Accounting enabled